Support   
Contact Us   
Search   
Your Position: Home > Support

Tag and Marking

2016/11/12      view:

The tag is riveted on the outside of the outer ring, or the inside of the inner ring, stating the type, manufacture number etc. (for two-ring type, the tag is near the filler plug).

·Marking

--The soft zone of the raceway hard‑

ening must be located in the area where there are no loads or less loads, we marked "s" outside ac-cordingly and where the plug is.

-Three teeth (with green decorating) have the maximum runout of the pitch circle. It should be here to adjust the backlash between the meshing gears.